Treatment Theroy

The Er:bium Glass fractional laser skin reconstruction system adopts fiber laser with 1550nm wavelength and installs a CPG which is arranged in matrix scanning output, emitting 50um-80um spot through a high focusing lens, the target tissue is water in the dermis, forming matrix-like hole (0.12mm) around focal spot penetration directly. The penetration depth of these small spots is about 2mm (the depth is related with solar elastic fibrotic maximum depth). At this point the normal tissue among holes generates heat bridge which starts wound rehabilitation reaction and thermal effects between scarfskin and dermal tissue, then experiencing inflammation phase, proliferation phase, remodeling phase. Drugs or cosmetic essence can be applied into the wound rehabilitation reaction, 1 hour after laser irradiation, the dermal fibrous tissue arranged dense, few inflammatory cells soakage, after 3 days proliferation of epidermal cells, inflammatory cells of dermal layer and fibroblast cells are increased. 7days fibroblasts in dermal layer is increased significantly, 15 days increasing in collagen synthesis, dermal thickening. After laser irradiation there is a certain effect for skin elasticity, skin hemoglobin content, water loss through the skin, sebum content, skin moisture content but no impact on the skin melanin content

Application

1. Patients with mild to moderate photoaging: Rough skin, large pores, fine wrinkles, skin loosen.

2. Wrinkles caused by sunlight or early aging wrinkles, on the lower eyelid, forehead, cheek as well as crow's-feet.

3. Face lifting and tightening.

4. Acne scar treatment.

1550A

1.  The target tissue is water, no skin color limit, Fitzpatrick I-VI are within application;

2.  The output spot diameter is 50-80 um, less thermal ablation and deeper penetration,  no scab, no pigmentation, no scar , more safe and effective treatment;

3.  Random scanning avoids thermal damage caused by heat accumulation, reducing pain of treatment;

4.  Applied1550nm fiber laser from IPG, the maximum output power is 35W which is 2-3 times of similar equipment, ensuring a deep penetration and long lifetime.

5.  6 scan patterns (Circle / Triangle/ Square/ Rectangle / Rhombus /Line) are available via CPG for different parts of skin, satisfying different therapists unique request;

6.  Laser output spot size, energy density, scan pattern, scanning speed, spot density, scanning area are adjustable , which were controlled by the computer operating system for various lesions, the tissue can be gasified at different depths (50-2000um), to ensure a more accurate treatment;

7.  Honkon also supply Er:bium Glass laser with maximum output power 15W and 25W to satisfy different purchasing requests.

Power Supply

AC 220V 50Hz / AC 110V 60Hz

Beam Delivery

Fiber

 Wavelength

1550nm

Optical Beam Quality

TEM₀₀

Maximum Output Power

35W/25W/15W

Spot Diameter

0.05-0.08mm

Spot Pattern

Circle / Triangle/ Square/ Rectangle / Rhombus /Line

Scan Area Spot Volume

 (Square)

16 spots4×436 spots6×664 spots8×8

100 spots10×10144 spots12×12

Spot Density

×1 / ×2 / ×3 / ×4 / ×5 / ×6

Aiming Beam Wavelength

635 nm

Aiming Beam Power

≤5mW

Scanning Mode

Random Scanning

Pulse Energy

 10mj~200mj (every stepping: 2mj)

Pulse Interval

1ms~100ms (every stepping: 1ms)

Working Mode

Continuous operation with intermittent loading

Cooling

Air Cooling

Dimensions (before packaged)

650mm*340mm*760mm

Dimensions (After Packaged)

900mm*470mm*1000mm

Net Weight

 33KGS

Gross Weight

 76KGS